500mm vs 1000mm Carbon Tube: Which Length Should You Buy?
We sell every size in both 500mm and 1000mm, and the question I get asked most isn't about diameter. It's about length. Here's the unglamorous truth from someone who packs these all day.
Buy 1000mm Unless You Have a Reason Not To
Price per millimeter is always better at 1000mm, usually 20–30% cheaper per unit length. If your project needs two 400mm pieces, one 1000mm tube gives you both with 200mm spare for mistakes. Two 500mm tubes cost more and leave you with awkward offcuts. The math almost always favors the long tube.
When 500mm Makes Sense
Three cases. One: you need exactly one short piece and own no saw: a 500mm tube plus a $10 hacksaw blade still beats paying a cutting service. Two: international shipping, where a 1-meter package jumps into oversize pricing on some routes and doubles the freight. If you're ordering overseas, check the shipping quote for both lengths before deciding; sometimes 500mm wins overall. Three: you're prototyping and want several diameters to test-fit. Short lengths across five sizes beat one long tube of the wrong size.
Cutting 1000mm Down Is Easy
Tape, fine hacksaw, light sanding. Five minutes per cut. We covered the full technique in our cutting guide, but the short version is that anyone who can assemble the project can cut the tube. Don't pay us to do it. Unless you need ten identical pieces with squared ends, in which case email us and we'll quote it.
Straightness Note
Longer tubes show bends more. A 1000mm tube with 0.4mm of bow is excellent; the same bow in a 500mm tube would look worse on paper but it's the same tube. If your build needs dead-straight long spans (camera sliders, precision frames), mention it in the order notes and we'll hand-pick from current stock. We do this routinely.
Browse by length: 5–10mm × 1000mm, 5–10mm × 500mm, 42–114mm × 1000mm, 42–114mm × 500mm. Same tubes, same quality. Just pick the math that works for your project.